Select mode & setup – Casella CEL CEL-450 User Manual

Page 33

background image

Operation Press

Display Shows

Comments

1. Select

Octave or

Third

Octave

Measure-

ment as

detailed in

Section 3.1

The highlighted option will

be the bandwidth used.

2. Display the

Main

menu, then

select

Setup

then

or

This is the Main menu

screen with the reverse

video cursor highlighting the

Setup option.

3. Move to

the Setup

selection

menu

This menu allows any of the

available setups for the

chosen narrowdband to be

selected.

Highlight the setup that is to

be used.

This setup will also be

stored and used the next

time the instrument is

switched on.

4. Move to

the Setup

Screen

This screen allows the

following parameters to be

selected:

SLM weightings,

Period measurement on/off,

Measurement Functions,

Frequency range.

5. If required,

change the

weightings to

enable

quick

edit

mode

Use

and

to select a

field.
Use

and

to change

the entry in the field.

Save the settings by

pressing

again to

resume normal operation.
Press

to return to the

Setup screen.

CEL-450/490 Operators Handbook - Page 33

Select Mode & Setup