2 select run timing – Casella CEL CEL-450 User Manual

Page 23

SELECT MEASUREMENT MODE,

TIMER SETTINGS, & SETUP

3.1 Select Measurement Mode (Bandwidth)

The measurement mode specifies the bandwidth that is to be used for
measurement. Select the measurement mode as follows.

Operation Press

Display Shows

Comments

1. Start from

the

Main menu

This is the Main menu

screen.

2. Select the

Measure

Mode

option

and

Move the reverse video

cursor to the required line.

3. Move to

the

Measure

Mode

This menu allows any of the

available bandwidths to be

selected.

The highlighted setting will

be used. This setting will

also be stored and used the

next time the instrument is

switched on.

When the required bandwidth has been selected, press

once to

obtain a Measurement screen or twice to obtain the Main menu that
gives access to all settings and stored data.

3.2 Select Run Timing

Measurements can be timed as follows.

Timers Off

Manually timed. This allows the user to start and

stop a measurement run whenever they want.

CEL-450/490 Operators Handbook - Page 23

Select Mode & Setup