Casella CEL CEL-450 - Manual (Page 26)

Operation Press Display Shows Comments
5. If required,
set
Duration
and Sync
Timer
to
enable
quick
edit
mode.
Use and to select a
field.
Use
and to change
the entry in the field.
Save the settings by
pressing again to
resume normal operation.
Press
to return to the
Timers menu.
6. When a
CEL-490 is
being
used, if
required
select
Delay
Timer from
the Timers
menu
followed
by
The first menu allows the
seven sets of run start and
stop times to be repeated
up to 999 times.
When required, use to
enable quick edit mode, use
and to change the
entry, then save the setting
by pressing again.
7. Select
second
Delay
Timer
menu
The second menu controls
seven sets of run start and
stop times where the time
is shown as
Day/Hour:Minute.
Different measuring times
can be set for each day of
the week with the option of
repeating them over a
period of several weeks.
When a Delay Timer is used
( √ ), the run starts at the
preset start time and stops
at the preset stop time.
8. If required,
set the
Delay Timer to
enable
quick
edit
mode
Use and to select a
field.
Use
and to change
the entry in the field from X
to √ .
Save the settings by
pressing again to
resume normal operation.
Press
to return to the
Timers menu.
Page 26 - CEL-450/490 Operators Handbook
Select Mode & Setup