Select mode & setup – Casella CEL CEL-450 User Manual
Page 28
Operation Press
Display Shows
Comments
2. Display the
Main
menu, and
select
Setup
then
or
This is the Main menu
screen with the reverse
video cursor highlighting the
Setup option.
3. Move to
the Setup
selection
menu
This menu allows any of the
available setups for
broadband to be selected.
Highlight the setup that is to
be used.
This setup will also be
stored and used the next
time the instrument is
switched on.
4. Move to
the Setup
Screen
This screen allows the
following parameters to be
selected:
SLM weightings,
Period measurement on/off,
Measurement Functions,
Dose parameters.
5. If required
select SLM
Response
from the
Setup
screen
or
then
This screen allows the
following weightings to be
set:
RMS: A, C, Z,
Time: F, S, I,
Peak: A, C, Z,
Q: 3, 4, 5, 6.
6. If required,
change the
weightings to
enable
quick
edit
mode
Use
and
to select a
field.
Use
and
to change
the entry in the field.
Save the settings by
pressing
again to
resume normal operation.
Press
to return to the
Setup screen.
Page 28 - CEL-450/490 Operators Handbook
Select Mode & Setup