Dimension One Spas 01510-1030 - Manual (Page 28)

Sonic Immersion System Dealer Installation Guide
10. Set GAIN CH 1 and CH 2 to 0.5V position.
11. Set MODE to the 3ch position.
12. Set BASS BOOST CH1 and CH 2 to the MIN position.
13. Set HIGH PASS CH 1 and CH 2 to the 200 HZ positions.
14. Set CH 1 to HP position and CH 2 to LP position.
Installation of Power Supply
Pre-Wire Power Supply
Locate the power supply kit that contains the power supply (P/N
01564-0) and a 12-pin connector (P/N 01564-19) containing wires in
the following configuration:
24