Optoma EH415e - Manual (Page 51)

50
User Controls
Auto Power Off (min)
Set the Auto Power Off interval. The projector powers off the lamp
after 30 minutes of no signal by default. The following warning is
displayed 60 seconds before power off.
Sleep Timer (min)
Set the Sleep Timer interval. The projector powers off after the
specified time period of inactivity (regardless of signal). The
following warning is displayed 60 seconds before power off.
Power Mode (Standby)
 Eco.: Choose “Eco.” to save power dissipation further < 0.5W.
 Active: Choose “Active” to return to normal standby and the
VGA out port will be enabled.
Quick Resume
If Quick Resume is On, the projector can resume operating soon
provided the projector is turned back on within 100 seconds of
being turned off.
OSD Time-Out
Set the OSD display time
N
ote
N
ote
When Power
Mode(Standby) is set to
Eco., the VGA & Audio
pass-through and RJ45
would be deactivated.
Limited functionality
is available on RS232
control.
N
ote
N
ote
Projector won’t really
be 100% turn off unless
end-user wait 100sec.