Optoma EH415e - Manual (Page 43)

42
User Controls
Setup | LAN Settings
If the connection is successful, the OSD display will show the
following dialogue box.
 Network State—to display network information.
 DHCP:
On: Assign an IP address to the projector from the DHCP
server automatically.
Off: Assign an IP address manually.
 IP Address—Select an IP address
 Subnet Mask—Select subnet mask number.
 Gateway—Select the default gateway of the network connected
to the projector.
 DNS—Select DNS number.
 Apply—Press “ENTER” to apply the selection.
 MAC Address—Read only.
N
ote
N
ote
Network sub-menu
can only be accessed
if a network cable is
connected.