beautypg.com

Warning and indicator lights – Subaru 2011 Tribeca User Manual

Page 296

background image

Black plate (139,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

& Temperature gauge

1)

Normal operating range

The temperature gauge shows engine
coolant temperature when the ignition
switch is in the

“ON” position.

The coolant temperature will vary in
accordance with the outside temperature
and driving conditions.

We recommend that you drive moderately
until the pointer of the temperature gauge
reaches near the middle of the range.
Engine operation is optimum with the
engine coolant at this temperature range.
Also, high revving operation while the
engine is not sufficiently warmed up
should be avoided.

CAUTION

If the pointer exceeds the normal
operating range, safely stop the
vehicle as soon as possible.

Refer to

“Engine overheating” F9-

14.

Warning and indicator lights

Several of the warning and indicator lights
illuminate momentarily and then turn off
when the ignition switch is initially turned
to the

“ON” position. This permits check-

ing the operation of the bulbs.
Apply the parking brake and turn the
ignition switch to the

“ON” position. The

following lights illuminate.

: Driver

’s seatbelt warning light

(The seatbelt warning light turns off
only when the driver fastens the
seatbelt.)

: Front passenger

’s seatbelt warning

light
(The seatbelt warning light turns off
only when the front seat passenger
fastens the seatbelt.)

: SRS airbag system warning light

: CHECK ENGINE warning light/Mal-

function indicator lamp

: Charge warning light

: Oil pressure warning light

: AT OIL TEMP warning light

/

: ABS warning light

Instruments and controls

3-9

– CONTINUED –

3

This manual is related to the following products: