Subaru 2011 Tribeca User Manual
Page 225
Black plate (68,1)
北米Model "A3160BE-C" EDITED: 2010/ 11/ 19
1-40
Seat, seatbelt and SRS airbags
The tether anchorages (upper an-
chorages) are provided for all the seating
positions of the second-row seat.
On each outboard rear/second-row seat,
you will find marks
“ ” at the bottom of the
seatback.
Each lower anchorage is located where
the seat cushion meets the seatback.
CAUTION
When you install a child restraint
system, follow the manufacturer
’s
instructions supplied with it. After
installing the child restraint system,
check to ensure that it is held
securely in position. If it is not held
tight and secure, the danger of your
child suffering personal injury in the
event of an accident may be in-
creased.
1. Slide the seat or seat pair to its
rearmost position.
2. Make the clearance between the seat
cushion and seatback a little wider to
locate the two anchorages (bars) for the
position where you want to install the child
restraint system.
3. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the lower hooks onto the
lower anchorages located at
“ ” marks on
the bottom of the seatback. When the
hooks are connected, make sure the
adjacent seatbelts are not caught.