Subaru 2011 Tribeca - Manual (Page 121)

47
If you wish to set a language not included in the list of languages that appears on
the SETUP MENU screen, highlight “OTHERS” in the second step above and enter
the code of the desired language (refer to the language code list on Page 55) using
the joystick. After entering the code, press the “ENTER” button.
To revert to the SETUP MENU screen, highlight the “ ” switch with the joystick,
and then press the “ENTER” button.
* This figure shows the screen for setting the
audio language.
Setting the Angle Mark Display
This setting allows you to decide whether or not the angle mark is to be displayed
on the screen. If you select “ON” in the procedure below, the angle mark is displayed
at the top left portion of the screen whenever a multi-angle recorded scene is en-
countered during playback. Refer to Page 34 for information on the multi-angle re-
corded scenes.
Angle mark
Initial Settings