Subaru 2011 Tribeca - Manual (Page 14)

12
Controls
AUTOMATIC
CLIMATE CONTROL
1. Rear A/C Cooling
A fan speed control dial is located on the
back of the center console. Turn the dial
to select one of four (0-4) fan speeds.
When the front passenger air conditioner
is operating, cool air comes from vents
on the ceiling. When the front passenger
air conditioner is off, room temperature air
comes from the vents.
2. Temperature Control
Separate temperature settings can be
made for the driver’s side and passenger’s
side by adjusting the dials appropriately.
Turn the dial clockwise and release to
increase the temperature by one degree.
Turn the dial counterclockwise and release
to reduce the temperature by one degree.
3. Heated Seats
The left button is for the driver’s seat
and the right button is for the front
passenger’s seat. To warm the seats,
press the appropriate button. Adjust the
temperature level by pressing the button.
Indicator lights beside the button show the
temperature level. To turn off, press the
button a few times until all indicator lights
go off or keep the button pressed for two
more seconds.
4. Defroster Button
Push the button to defrost or dehumidify
the windshield and front door windows.
5. Automatic On and Off
This system automatically controls
outlet air temperature, fan speed, air
flow distribution, air inlet control, and air
conditioner compressor operation. Press
“AUTO” to activate. Press “OFF” to turn off.
2
3
4
5
1
782335_11_Tribeca_QRG_102010b.indd 12 10/20/10 3:10 PM