Installing the cyclone v soc development kit, Installing the cyclone v soc development kit -6 – Altera SDK for OpenCL Cyclone V SoC User Manual
Page 29
1. In the main page within the Altera website, click MYALTERA and log into your account.
2. Click the link to the Self-Service Licensing Center.
3. Perform the steps outlined in the Requesting a License from the Self-Service Licensing Center section of
the Altera Software Installation and Licensing manual to obtain and activate the license.
You must obtain a separate license for the SoC Embedded Design Suite (EDS).
4. If you have a fixed license, append the
file to the
LM_LICENSE_FILE environment variable in the following manner:
a. Create a backup copy of the provided license file.
b. Save the new license file on your local hard drive.
c. Append the
file to the LM_LICENSE_FILE environment
variable.
5. If you have a floating licence, append the
file to the
LM_LICENSE_FILE environment variable in the following manner:
a. Obtain the port number and host name from the network or system administrator. Alternatively,
the information is in the license file line
SERVER
ID>
.
The license location for the user is
specify @
b. Modify the license file to update the port number and host name.
c. Append the
file to the LM_LICENSE_FILE environment
variable.
Related Information
•
•
•
Installing the Cyclone V SoC Development Kit
To execute an OpenCL kernel on a Cyclone V SoC, first install the Cyclone V SoC Development Kit and
configure it as described in the Altera SDK for OpenCL (AOCL) documentation.
1.
Writing an SD Card Image onto the Micro SD Flash Card on Linux
on page 3-7
To write an SD card image onto the micro SD flash card on Linux, extract the SD card image from the
Cyclone V SoC Development Kit Reference Platform, and then write the image onto the micro SD
flash card.
2.
on page 3-7
Configure the SW3 dual in-line package (DIP) switches on the Cyclone V SoC Development Kit.
3.
Setting Up Terminal Connection in Linux
on page 3-8
To set up the terminal connection for the Cyclone V SoC Development Kit in Linux, specify the USB
virtual COM port settings.
4.
Setting Environment Variables and Loading OpenCL Linux Kernel Driver
After you turn on the board and establish terminal connection, log into the Cyclone V SoC
Development Kit as user
root
with no password. Then, before you run your host application, set the
environment variables and load the OpenCL Linux kernel driver.
3-6
Installing the Cyclone V SoC Development Kit
OCL006-15.0.0
2015.05.04
Altera Corporation
Setting Up the Altera SDK for OpenCL, SoC EDS, and the Cyclone V SoC Development Kit for Linux