Altera RAM Initializer - Manual (Page 13)

Altera Corporation Confidential—Internal Use Only 2–1
May 2008 RAM Initializer (ALTMEM_INIT) Megafunction User Guide
Chapter 2. Getting Started
Software and
System
Requirements The instructions in this section require the following software:
■ Quartus ® II software version 8.0 or later
■ For operating system support information, refer to:
www.altera.com/support/software/os_support/oss-index.html
MegaWizard
Plug-In Manager
Customization The MegaWizard ® Plug-In Manager creates or modifies design files that
contain custom megafunction variations, which can then be instantiated
in a design file. The MegaWizard Plug-In Manager provides a wizard that
allows you to specify options for the RAM Initializer (ALTMEM_INIT)
megafunction features in your design.
1 In this document, HardCopy ® devices refer to the
HardCopy Stratix ® and HardCopy II devices; Stratix devices
refer to the Stratix IV, Stratix III, Stratix II, and Stratix devices.
Start the MegaWizard Plug-In Manager in one of the following ways:
■ On the Tools menu, click MegaWizard Plug-In Manager.
■ When working in the Block Editor, on the Edit menu, click Insert
Symbol as Block
, or right-click in the Block Editor, point to Insert,
and click Symbol as Block. In the Symbol window, click
MegaWizard Plug-In Manager
.
■ Start the stand-alone version of the MegaWizard Plug-In Manager by
typing the following command at the command prompt:
qmegawiz
r