DirecTV HR10-250 - Manual (Page 118)

108
C h a p t e r 6 M e s s a g e s a n d S e t u p
Standby
You can put your DIRECTV ® HD DVR in standby mode by selecting Standby from
DIRECTV Central, or by pressing the STANDBY button on the front of your HD DVR.
• The PWR light on the front of the HD DVR turns off, and it stops sending a picture to
your TV. If a recording is in progress, the red REC light remains lit.
• If you temporarily turned off Parental Controls, standby mode enables them again.
• The HD DVR responds to only a few buttons on the remote control.
• The HD DVR will not tune to previously ordered pay per view programs unless you
have them scheduled to be recorded.
• Programs that are recording or scheduled to record will record in standby mode.
To turn off standby mode, press the DIRECTV button or the LIVE TV button on your
remote control, or on the HD DVR’s front panel.
If you have an A/V receiver or
switch box that automatically
detects video signals, you can use
standby mode to “turn off” your HD DVR,
allowing the switch box to detect a new
video signal, such as a DVD player, and
send that picture to your TV.
DIRECTV Central Standby