Motor, Carrying out the installation, Installation – Pilz Cable PMCprimoDrive>Mod-Profibus:L=0,45m User Manual
Page 24

Installation
6-2
Operating Manual: PMCtendo AC
Motor
• Check the servo motor for any transport damage. Never install a servo motor that
shows clear signs of damage!
• Ensure that any anti-corrosion agents and/or contamination on the shaft end (drive
end) are thoroughly removed. This can be done using a standard solvent. Make sure
that the solvent cannot come into contact with the gaskets and/or bearings, otherwise
materials may be damaged!
Carrying out the installation
WARNING!
Electric shock
Contact with live parts will result in serious injury.
The motor should always be installed with the supply voltage switched off. Switch off
the supply voltages to all connected devices!
Hazardous values may still be present up to 5 minutes after the voltage is switched off,
due to residual charges in the servo amplifier’s capacitors.
When the shaft is rotating (externally driven, running down) the motor acts as a
generator. This means that hazardous voltages will be present at the connection
terminals.
If possible, only use backlash-free, frictionally engaged chucks or clutches.
Use the tightening thread provided in the motor shaft to tighten the clutches, gears or
belt pulleys and, if possible, warm up the drive elements. Do not use excessive force as
this will damage bearings, feedback and the motor shaft.
Fig. 6-1: Tightening thread in the motor shaft
Spacing washer
Tightening thread
Please note:
• Align the clutch correctly
Misalignment can cause undue vibration and can damage the ball bearings and
clutch!
- Cable Resolver DD4plug>ACplug:L10mSK Cable Resolver DD4plug>ACplug:L05mSK Cable Hiperface DD4plug>ACplug:L05m Cable Power DD4plug>ACbox:L05mQ1,5BrSK Cable Power DD4plug>ACbox:L10mQ1,5BrSK Cable Power DD4plug>ACplug1:L05mQ1,5BrSK Cable Resolver DD4plug>ACplug:L15mSK Cable Power DD4plug>ACbox:L15mQ1,5BrSK Cable Power DD4plug>ACbox:L20mQ1,5BrSK PMCtendo AC2.62/0/5/1/2/5/H/3 PMCtendo AC2.74/0/5/1/1/4/H/2 PMCtendo AC2.62/1/M/1/2/5/H/3 PMCtendo AC2.64/1/5/1/2/5/H/3 PMCtendo AC2.73/0/5/1/2/5/H/3 PMCtendo AC2.73/1/M/1/2/5/H/4 PMCtendo AC2.62/0/L/1/2/5/H/3 PMCtendo AC2.63/1/M/1/2/5/H/3 PMCtendo AC2.73/1/5/1/2/5/H/3 PMCtendo AC2.63/0/L/1/2/5/H/3 PMCtendo AC2.65/0/5/1/2/5/H/3 PMCtendo AC2.65/0/L/1/2/5/H/3 PMCtendo AC2.75/0/L/1/2/5/H/3 PMCtendo AC2.72/0/5/1/2/5/H/3 PMCtendo AC2.74/0/M/1/2/5/H/3 PMCtendo AC2.75/0/M/1/2/5/H/3 PMCtendo AC3.35/0/5/1/1/4/H/3 PMCtendo AC2.62/1/5/1/2/5/H/3 PMCtendo AC2.76/0/5/1/2/5/H/3 PMCtendo AC2.75/1/5/1/2/5/H/4 PMCtendo AC2.74/1/5/1/2/5/H/3 PMCtendo AC3.34/0/L/1/1/4/H/6 PMCtendo AC2.73/1/5/1/2/6/H/3 PMCtendo AC2.63/0/5/1/2/5/H/6 PMCtendo AC2.74/0/L/1/2/5/H/4 PMCtendo AC1.A4/0/L/1/2/5/H/2 PMCtendo AC2.63/0/5/1/2/5/H/3 PMCtendo AC3.31/0/M/1/1/4/H/6 PMCtendo AC3.32/0/5/1/1/4/H/6 PMCtendo AC3.32/0/M/1/1/4/H/6 PMCtendo AC3.31/0/5/1/1/4/H/6 PMCtendo AC3.34/0/5/1/1/4/H/3 PMCtendo AC2.62/0/L/1/2/5/H/6 PMCtendo AC4.62/0/5/1/6/6/H/3 PMCtendo AC3.32/0/5/1/1/4/H/3 PMCtendo AC3.32/0/L/1/1/4/H/6 PMCtendo AC3.31/0/L/1/1/4/H/3 PMCtendo AC2.74/0/L/1/2/6/H/4 PMCtendo AC3.34/0/L/1/6/5/H/3 PMCTENDO AC3.33/0/M/1/1/4/H/3 PMCtendo AC1.A4/0/M/1/1/4/H/3 PMCtendo AC2.72/0/M/1/1/4/H/3 PMCtendo AC4.62/0/5/1/1/4/H/3 PMCtendo AC2.62/0/5/1/1/4/H/3 PMCtendo AC2.62/1/5/1/1/4/H/3 PMCtendo AC2.62/1/M/1/1/4/H/3 PMCtendo AC2.64/0/5/1/1/4/H/3 PMCtendo AC2.64/0/M/1/1/4/H/3 PMCtendo AC2.64/1/5/1/1/4/H/3 PMCtendo AC2.73/0/5/1/1/4/H/3 PMCtendo AC2.73/1/5/1/1/4/H/3 PMCtendo AC2.74/0/5/1/1/4/H/3 PMCtendo AC2.74/1/5/1/1/4/H/3 PMCtendo AC2.76/0/5/1/1/4/H/3 PMCtendo AC3.34/0/M/1/1/4/H/3 PMCtendo AC2.65/1/M/1/1/4/H/3 PMCtendo AC2.75/1/M/1/1/4/H/4 PMCtendo AC2.63/0/5/1/6/6/H/3 PMCtendo AC2.62/0/M/1/1/4/H/3 PMCtendo AC4.63/0/L/1/6/5/H/3 PMCtendo AC1.A7/1/5/1/2/5/H/2 PMCtendo AC2.64/0/L/1/2/5/H/4 PMCtendo AC1.A5/0/5/1/1/4/H/3 PMCtendo AC3.32/1/M/1/1/4/H/6 PMCtendo AC2.53/0/5/1/1/4/H/3 PMCtendo AC3.32/1/5/1/1/4/H/6 PMCtendo AC2.73/1/M/1/1/4/H/3 PMCtendo AC3.35/1/5/1/1/4/H/3 PMCtendo AC2.76/0/L/1/6/5/H/2 PMCtendo AC4.65/0/L/1/6/5/H/3 PMCtendo AC2.77/0/M/1/1/4/H/3 PMCtendo AC1.A9/1/5/1/2/6/H/2 PMCtendo AC2.65/1/5/1/1/4/H/3 PMCtendo AC2.53/1/5/1/1/4/H/3 PMCtendo AC2.64/0/5/1/6/6/H/3 PMCtendo AC4.75/0/L/1/6/5/H/2 PMCtendo AC1.A4/0/L/1/2/5/H/3 PMCtendo AC4.65/0/M/1/6/6/H/6 PMCtendo AC1.A9/1/5/1/2/6/H/3 PMCtendo AC4.62/1/M/2/6/6/H/3 PMCtendo AC1.B2/0/L/1/6/6/H/3 PMCtendo AC2.53/1/5/1/6/6/H/3 PMCtendo AC2.65/1/M/1/6/6/H/3 PMCtendo AC3.35/1/5/1/6/6/H/3 PMCtendo AC2.62/1/M/2/6/6/H/3 PMCtendo AC3.32/0/M/2/6/5/H/6 PMCtendo AC3.32/0/M/2/6/6/H/6 PMCtendo AC2.76/0/L/1/1/4/H/3 PMCtendo AC2.54/0/5/1/1/4/H/3 PMCtendo AC1.A5/0/L/1/6/6/H/3 PMCtendo AC1.B4/1/5/1/6/5/H/A PMCtendo AC2.54/0/L/1/1/4/H/3 PMCtendo AC4.64/0/L/1/6/5/H/3 PMCtendo AC2.75/0/L/1/2/6/H/3 PMCtendo AC3.32/0/5/1/7/6/H/6 PMCtendo AC3.34/1/L/1/1/4/H/6 PMCtendo AC3.35/0/5/1/1/4/H/6 PMCtendo AC4.63/0/5/1/6/5/H/3 PMCtendo AC2.64/0/5/1/1/4/H/6 PMCtendo AC1.B2/0/5/1/6/6/H/3 PMCtendo AC4.62/1/M/2/6/6/H/D PMCtendo AC4.64/0/L/1/7/5/H/6 PMCtendo AC2.53/0/M/1/7/5/H/3 PMCtendo AC2.74/1/M/1/7/5/H/3 PMCtendo AC2.74/0/5/1/7/5/H/4 PMCtendo AC4.64/1/M/2/7/5/H/3 PMCtendo AC2.64/0/5/1/7/5/H/6 PMCtendo AC3.35/0/M/2/7/5/H/3 PMCtendo AC3.24/1/M/1/7/5/H/6 PMCtendo AC2.75/0/L/1/7/5/H/4 PMCtendo AC1.A5/0/L/2/7/5/H/2 PMCtendo AC1.A7/1/5/2/6/6/H/3 PMCtendo AC3.34/0/L/1/6/5/H/6 PMCtendo AC2.53/1/M/1/7/6/H/3 PMCtendo AC4.65/0/L/2/7/6/H/3 PMCtendo AC4.64/0/L/2/7/5/H/6 PMCtendo AC4.63/0/L/2/6/5/H/3 PMCtendo AC4.64/0/L/2/6/5/H/3 PMCtendo AC3.24/1/5/1/7/5/H/6 PMCtendo AC3.34/0/L/2/6/5/H/6