Pilz Cable PMCprimoDrive>Mod-Profibus:L=0,45m - Manual (Page 15)

3-1 Operating Manual: PMCtendo AC
Safety
Intended use
The servo motors are designed for incorporation into a machine or for assembly with
other components to form a plant or machine. They must be operated in conjunction
with servo amplifiers with speed, torque or position control.
The servo motors may not be operated directly on the mains. The servo motors must be
operated via a suitable servo amplifier which has been set with the correct parameters
(e.g. PMCtendo DD, PMCprimo Drive from Pilz).
The thermal switch incorporated into the motor winding must be monitored and
evaluated.
The following is deemed improper use:
• Any component, technical or electrical modification
• Use outside the areas described in this manual
• Use outside the documented technical details (see chapter entitled “Technical
Details”).
Safety guidelines
Failure to keep to these guidelines will render all warranty and liability claims invalid:
• All health and safety / accident prevention regulations for the particular area of
application must be observed.
• The unit must not be put into service until it can be guaranteed that the plant or
machine into which the servo motor has been incorporated meets the requirements of
the EU Directive 98/37/EC (Machinery Directive) as a whole.