Changing the lcd contrast, Configuring the phone screen saver – Cisco IP Phone SPA 504G User Manual
Page 66
Using the Web Interface
Changing the LCD Contrast
Cisco Small Business Pro IP Phone SPA 504G User Guide (SIP)
60
5
Changing the LCD Contrast
STEP 1
Log in to the web interface.
STEP 2
In the Voice tab, click the User tab.
STEP 3
Under Audio Volume, you can adjust the LCD contrast by entering a number between 1 and
10, with 1 being low contrast.
STEP 4
Click Submit All Changes.
Configuring the Phone Screen Saver
To configure the phone screen saver:
STEP 1
Log in to the web interface.
STEP 2
In the Voice tab, click the Phone tab.
Under General, you can configure the following:
•
Screen Saver Enable: Turns the screen saver on and off.
•
Screen Saver Wait: The number of seconds that the phone is idle before the screen
saver starts.
•
Screen Saver Icon: The display type:
-
A background picture.
-
The station time in the middle of the screen.
-
A moving padlock icon. When the phone is locked, the status line displays a
scrolling message “Press any key to unlock your phone.”
-
A moving phone icon.
-
The station date and time in the middle of the screen.
STEP 3
Click Submit All Changes.