Fluke 725 - Manual (Page 63)

Accessories
53
Accessories
For more information about these accessories and their
prices, contact your Fluke representative. Pressure
Modules and Fluke model numbers (see Table 10) are
listed below. (Differential models also operate in gage
mode.) Contact your Fluke representative about new
pressure modules not listed here.
•
700HTP 0 to 10,000 PSI Pump
•
700PTP -11.6 to 360 PSI Pump
•
700TC1 and 700TC2 Thermocouple Mini-plug Kits
External Fluke Pressure Module Compatibility
The output of Fluke 700P pressure modules can cause
the 725’s 5 digit display to overflow, or else produce
values that are too low to be read if inappropriate units
are selected. This is prevented by displaying OL on the
display per the following table.
Table 10. Fluke Pressure Module Compatibility
Pressure Unit Module Compatibility
Psi Available on all pressure ranges
In. H
2
0 All ranges through 3000 psi
cm. H
2
0 All ranges through 1000 psi
Bar 15 psi and above
Mbar All ranges through 1000 psi
KPa Available on all pressure ranges
In.Hg. Available on all pressure ranges
mm. Hg All ranges through 1000 psi
Kg/cm 2 15 psi and above