Contrast adjustment, 725 users manual, Figure 6. adjusting the contrast – Fluke 725 User Manual
Page 26
725
Users Manual
16
Contrast Adjustment
Note
Available with V2.1 Firmware or greater. To
identify firmware version, press and hold
J
when powering up. The firmware version will be
shown in the upper units display for about 1
second after initialization.
To adjust the contrast, proceed as follows:
1. Press
C
and
O
until Contst Adjust is displayed as
shown in Figure 6.
2. Press and hold
X
to darken contrast.
3. Press and hold
W
to lighten contrast.
4. Press
S
to save the contrast level.
V mA
LOOP
V mA
TC
RTD
˚
C
˚
F
Hz
100%
25%
25%
RECALL
ZERO
MEAS
SOURCE
STORE
SETUP
0%
MULTIFUNCTION CALIBRATOR
725
1
4
2
3
sh06f.eps
Figure 6. Adjusting the Contrast