Woodhaven 966D: Domino Add-on Kit - Manual

966D
Domino Kit
Please Read Carefully!
BEFORE BEGINNING
Identify and verify that you have all the parts listed. Read
the instructions at least once, familiarizing yourself with the
parts and assembly instructions before beginning. You’ll need
a #3 Phillips screwdriver for assembly. You'll use the new
hardware, as well as some of the existing
hardware from your 966 Biscuit Master.
DISASSEMBLY
Remove the 6" fences (4006) from
the Fence Brackets (966C) and remove
the Fence Brackets from the MDF
Base (966B). Save the hardware you
remove as you will use some of it for the
Assembly. See fig. 1.
ASSEMBLY
Install the 1-1/2" screws (MF025)
thru the countersunk holes in the MDF
Base (966B) and install the Domino
Guides (966E1) over the screws as
shown. Start two oval nuts (5760B) on
the two screws closest to the edges of the
MDF Base and start an offset oval nut
(5765B) on the remaining two screws,
with the wide side of this oval nut facing
the other oval nut as shown. Align the
end and edge of the Fence Bracket with
the two edges of the "L" cutout in the
Domino Guide and tighten the screws.
See fig. 2.
Parts List:
Part Description Quantity
966E1 Domino Guide . . . . . . . . . . . . . . . . . . . . . 1 pair
966E2 Domino Fence . . . . . . . . . . . . . . . . . . . . . 1 pair
5765B Offset Oval Nut . . . . . . . . . . . . . . . . . . . . . . . . 2
5760B Oval Nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
MF025 1-1/2" Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5771B 3/4" Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1
2
2
966C
Fence
Bracket
966E1
Domino
Guide
5765B
966C
Fence
Bracket
4006