Vortech 2007-2009 FORD GT500 OEM POWER PACK UPGRADE User Manual

Page 4

DP/N: 007125v1.0

27AUG2010 GT500 OEM POWER PACK

iii

VORTECH OEM POWER PACK UPGRADE

Installation Instructions

2007-2009 FORD GT500

Before beginning this installation,

please read through this entire instruction booklet

The Vortech 2007-2009 FORD GT500 OEM Power Pack upgrade was designed specifi-

cally for use on 2007-2009 Ford Mustang Shelby GT500 vehicles equipped with the

OEM supercharger to support applications with increased horsepower over the OEM

design. As with any power enhancing product, this unit is intended for use on healthy,

well-maintained engines. Vortech Engineering is not responsible for engine damage.

Installation on new vehicles will not harm or adversely affect the break-in period so long

as factory break-in procedures are followed.
For best performance and continued durability, please take a note of the following key

points:

Use only premium grade fuel 91 octane or higher (R+M/2).

Always listen for any sign of detonation (pinging) and discontinue hard use (no

boost) until problem is resolved.

TOOL & SUPPLY REQUIREMENTS:

• 15/16” wench
• 9/16” wrench
• 8mm socket, 1/4” drive
• 10mm socket, 1/4” drive
• 13mm socket, 1/4” drive
• 15/16” socket, 1/2” drive
• 19mm socket, 1/2” drive
• 1/4” drive ratchet
• 1/4” drive, 3” extension
• 3/8” drive breaker bar
• 1/2” drive breaker bar
• 5/32” Allen
• 2.5mm Allen
• 5mm Allen
• 5/16 Nut Driver
• Flat screw driver or upholstery tool
• Moly-based grease
• Utility Knife