Vortech 2007-2009 FORD GT500 OEM POWER PACK UPGRADE - Manual (Page 18)

DP/N: 007125v1.0
© 2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
27AUG2010 GT500 OEM POWER PACK
13
5. POWER PACK CAI INSTALLATION, CONT'D
E. Remove the MAF sensor module from the intake
tube assembly using a 2.5mm allen key. (See
Figure 5-d) Inspect the o-ring for damage or
deformation, replace if necessary.
F. Locate the new MAF sensor housing from the kit
and install the MAF sensor module into the hous-
ing, securing it with the factory hardware. (See
Figure 5-e)
G. Install the cone air filter onto the MAF housing.
H. Place filter and MAF housing assembly in the heat
shield area. Be sure the MAF sensor module is
positioned outside the heat shield. (See Figure
5-f)
Fig. 5-d
Fig. 5-e
Fig. 5-f