Ubiquiti Networks airFibe5 - Manual (Page 39)

36
Chapter 9: System Tab airFiber ® AF5/AF5U User Guide
Ubiquiti Networks, Inc.
Upload Firmware Click this button to update the airFiber
AF-5 with new firmware.
The airFiber AF-5 firmware update is compatible with
all configuration settings. The system configuration is
preserved while the airFiber AF-5 is updated with a new
firmware version. However, we recommend that you back
up your current system configuration before updating the
firmware.
This is a three-step procedure:
1. Click Choose File to locate the new firmware file. Select
the file and click Open.
2. Click Upload to upload the new firmware to the
airFiber AF-5.
3. The Uploaded Firmware Version is displayed. Click
Update to confirm.
If the firmware update is in process, you can close the
firmware update window, but this does not cancel the
firmware update. Please be patient, as the firmware
update routine can take three to seven minutes. You
cannot access the airFiber AF-5 until the firmware update
routine is completed.
WARNING: Do not power off, do not reboot, and do
not disconnect the airFiber AF-5 from the power
supply during the firmware update process as
these actions will damage the airFiber AF-5!
Device
The Device Name (host name) is the system-wide device
identifier. The SNMP agent reports it to authorized
management stations. The Device Name will be used in
popular router operating systems, registration screens,
and discovery tools.
Device Name Specifies the host name.
Interface Language Allows you to select the language
displayed in the web management interface. English is the
default language.
Date Settings
Time Zone Specifies the time zone in relation to
Greenwich Mean Time (GMT).
Startup Date When enabled, you are able to change the
airFiber AF-5’s startup date.
•
Startup Date Specifies the airFiber AF-5’s startup date.
Click the Calendar icon or manually enter the date in
the following format: 2-digit month/2-digit day/4-digit
year. For example, for January 5, 2014, enter 01/05/2014
in the field.
System Accounts
You can change the administrator password to protect
your device from unauthorized changes. We recommend
that you change the default administrator password when
initially configuring the device.
Administrator Username Specifies the name of the
administrator.
Key button Click this button to change the administrator
password.
•
Current Password Enter the current password for
the administrator account. It is required to change the
Password or Administrator Username.
• New Password Enter the new password for the
administrator account.
• Verify New Password Re-enter the new password for
the administrator account.
Note: The password length is 8 characters
maximum; passwords exceeding 8 characters will
be truncated.
Read-Only Account Check the box to enable the
read-only account, which can only view the Main tab.
Configure the username and password to protect your
device from unauthorized changes.
•
Read-Only Account Name Specifies the name of the
system user.
• Key button Click this button to change the read-only
password.
- New Password Enter the new password for the
read-only account.
- Show Check the box to display the read-only
password characters.