Turning Technologies TurningPoint AnyWhere - Manual (Page 59)

TurningPoint AnyWhere User Guide 58
TurningPoint AnyWhere Settings
Response Devices
ResponseCard Channels
Response Device General
Setting Description
Receiver Serial # When a receiver is plugged into the computer, the serial number and firmware
version number is displayed. Using the drop-down menu, the radio frequency
channel number for the receiver can be set.
Setting Description
Force Channel
Change When set to True, the receiver retains the channel as set in the ResponseCard
channel settings. If set to False, the channel will default to the last used
channel on the ResponseCard RF Receiver.
Enforce
Participant List When set to True, the software excludes the responses from participants who
are not in the loaded participant list. If set to False, all participants’ responses
will be accepted and appended to the end of the list.
Overwrite User
Information When set to True, allows user information from a ResponseCard XR or NXT to
overwrite information in a loaded participant list. If set to False, the user
information will be written only if that information is currently blank.
Invalid Response
Notification When set to True, allows the ResponseCard to blip red a few times to indicate
an invalid response was chosen or green to indicate a valid response was
chosen.