Turning Technologies TurningPoint AnyWhere - Manual (Page 17)

TurningPoint AnyWhere User Guide 17
Configuring a PresenterCard
• Placing a check mark in the box next to Save Information will save the account information.
5 Select Allow Guests or Require Login. Allowing guests will allow anyone with the Session ID to
connect, a Required Login will only allow those with and active ResponseWare account to connect.
6 If a Reserved Session ID was created through www.rwpoll.com, enter it in the Reserved ID box.
7 Click Login.
• At the first login, a window appears with the license agreement. The agreement must be accepted to
continue.
8 Click Close.
Next Steps
Use the polling test to verify the devices have been properly configured. See Testing the Response Devices
on page 18 for more information.
Configuring a PresenterCard
A PresenterCard must be paired with TurningPoint AnyWhere before it can be used as a presentation
device.
To pair a PresenterCard with TurningPoint AnyWhere...
1 Connect the RF receiver to the presentation computer.
2 Set the channel on the PresenterCard to the same channel as the device receiver.
a Press Channel.
b Press the Back or Forward button to navigate to the desired channel number.
c Press Channel.
3 Click the Main Menu button on the showbar.
Note
Reserved Session IDs are custom IDs that allow
presenters to keep the same Session ID.