Load the smart cartridges loading – Taser X3 User Manual
Page 46
46
Loaded X3 ECD viewed at an angle.
Load the Smart Cartridges
Loading
Smart Cartridges are shipped with a shipping cover in place. Remove these covers before attempting to load a
cartridge into an X3 ECD.
1
Point the ECD in a safe direction.
2
Ensure the CAM-Lock Safety is in the down (SAFE) position.
3
Make sure the protective shipping cover is removed from the Smart Cartridge.
4
Keeping your hand away from the blast doors, place the Smart Cartridge into the cartridge bay until an
audible click is heard.
NOTE: The position of the tab on the bottom of the cartridge; this side of the cartridge goes in the bottom
of the X3 cartridge bay.
Chapter 3
Features & Operation