Taser X3 User Manual
Page 38
38
Configuring The X3 ECD and Viewing the System Status
Warranty Information
To view the warranty information, follow these steps:
1
Point the X3 ECD in a safe direction.
2
Shift the CAM-Lock safety to the down (SAFE) position.
3
Remove the Smart Cartridges from the X3 ECD. See the "Unloading" section in this manual for more
information.
4
Press and hold the selector switch until the MAIN MENU displays.
5
Press the right ARC switch until the INFO option is highlighted.
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
6
Press the left ARC switch.
7
Press the right ARC switch until the WARRANTY option is highlighted.
INFO MENU
SYSTEM
WARRANTY
EPM
8
Press the left ARC switch. From top to bottom, the CID displays the manufacturing date, the warranty
expiration date, and any minor, major, or critical faults.
NOTE: Multiple zeroes indicate that no faults are detected.
WARRANTY INFO
08/04/2009
00000000
00000000
00000000
09/04/2010
9
Press the selector switch to return to the INFO MENU.
10
You can view the other options. If you are done configuring the X3 ECD, press the selector switch again to
go to the MAIN MENU.
Chapter 3
Features & Operation