Taser X3 User Manual
Page 39
39
Configuring The X3 ECD and Viewing the System Status
Language
To set the X3 ECD’s language, follow these steps:
1
Point the X3 ECD in a safe direction.
2
Shift the CAM-Lock safety to the down (SAFE) position.
3
Remove the Smart Cartridges from the X3 ECD. See the "Unloading" section in this manual for more
information.
4
Press and hold the selector switch until the MAIN MENU displays.
5
Press the right ARC switch until you are at the LANGUAGE menu.
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
6
Press the left ARC switch.
7
Press the right ARC switch until you are at the language you want to use.
LANGUAGE MENU
ENGLISH UK
FRENCH
GERMAN
ENGLISH US
SPANISH
NOTES:
•
Be careful in selecting the language. If the CID suddenly becomes unrecognizable, the wrong language
may have been chosen.
•
Selecting any language other than ENGLISH US will result in all measurements displayed in metric.
•
If you have difficulty setting the language, download the language packet firmware from EVIDENCE.COM.
8
Press the left ARC switch.
9
Press the selector switch to return to the MAIN MENU.
10
You can set the other options. If you are done configuring the X3 ECD, press the selector switch again to exit.
Chapter 3
Features & Operation