Taser X3 User Manual
Page 28
28
3
Pull the trigger to deploy the second cartridge.
Two Deployed Cartridges
One Remaining, Un-Deployed Cartridge
1
Two Cartridges Energized,
Connection Status Good
Seconds Elapsed in Cycle (1)
80% Remaining
Cartridge Not Yet Selected
1
Because both the first and second cartridges are energized, both subjects are under the ECD's effect. Each of the
two firing bays will run for approximately five seconds on its own counter. If the second cartridge is deployed
while the first cartridge is still energized, the first cartridge’s cycle will end before the second cartridge’s cycle
ends. To keep the first subject under effect, the user must determine whether such an application is necessary
and, if so, press the ARC switch.
Chapter 3
Features & Operation