Taser X3 User Manual
Page 37
37
Configuring The X3 ECD and Viewing the System Status
Viewing the EPM Information
To view information about the EPM, follow these steps:
1
Point the X3 ECD in a safe direction.
2
Shift the CAM-Lock safety to the down (SAFE) position.
3
Remove the Smart Cartridges from the X3 ECD. See the "Unloading" section in this manual for more
information.
4
Press and hold the selector switch until the MAIN MENU displays.
5
Press the right ARC switch until the INFO option is highlighted.
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
6
Press the left ARC switch.
7
Press the right ARC switch until the EPM option is highlighted.
INFO MENU
SYSTEM
WARRANTY
EPM
8
Press the left ARC switch. From top to bottom, the CID displays the EPM serial number, battery capacity
available in milliamp/seconds, battery capacity used in milliamp/seconds, battery voltage, and percentage
of battery capacity remaining.
EPM INFO
E12345678
0823156
11.450V
80%
4100000
9
Press the selector switch to return to the INFO MENU.
10
You can view the other options. If you are done configuring the X3 ECD, press the selector switch again to
go to the MAIN MENU.
Chapter 3
Features & Operation