Taser X3 - Manual (Page 31)

31
Configuring The X3 ECD and Viewing the System Status
WARNING
Remove the Smart Cartridges from the X3 ECD before configuring the ECD or viewing its status. See the
"Unloading" section in this manual for more information.
Before using an X3 ECD, select the deployment mode, language, and set the LED flashlight and laser settings (if
necessary) through the X3 ECD’s CID. You also can view status information about your ECD.
Configuring The X3 ECD and Viewing the System Status
Configuring the Deployment Modes
The X3 ECD can be configured for two different deployment modes, Semi-Automatic and Manual.
To select the deployment mode, follow these steps:
1 Point the X3 ECD in a safe direction.
2 Shift the CAM-Lock safety to the down (SAFE) position.
3 Remove the Smart Cartridges from the X3 ECD. See the "Unloading" section in this manual for more
information.
4 Press the selector switch to activate the MAIN MENU.
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
5 Press the right ARC switch until you are at the SYSTEM option in the main menu.
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
6 Press the left ARC switch.
7 Use the left ARC switch to scroll to the option you want to use:
MODE MANUAL
SYSTEM MENU
MODE
OFF
TRAINING
MANUAL
Chapter 3 Features & Operation