Taser X3 User Manual
Page 33
33
SYSTEM MENU
MODE
OFF
TRAINING
SEMI_AUTOMATIC
TRAINING OFF
SYSTEM MENU
MODE
ON
TRAINING
SEMI_AUTOMATIC
TRAINING ON
9
Press the selector switch to go to the previous menu. You now can configure additional settings. If you are
done configuring the ECD for now, press the selector switch again to exit.
Configuring The X3 ECD and Viewing the System Status
Configuring the Flashlight
The X3 ECD’s LED flashlight can be turned on or off, or set to adjust its intensity depending on the ambient light
(automatic). To turn this feature on or off, follow these steps:
1
Point the X3 ECD in a safe direction.
2
Shift the CAM-Lock safety to the down (SAFE) position.
3
Remove the Smart Cartridges from the X3 ECD. See the "Unloading" section in this manual for more
information.
4
Press and hold the selector switch until the MAIN MENU displays.
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
5
Press the left ARC switch.
6
Press the left ARC switch again to scroll through these options:
SIGHTING MENU
FLASHLIGHT
SINGLE
LASER
ON
FLASHLIGHT ON
Chapter 3
Features & Operation