Taser X3 - Manual (Page 40)

40
Remove the Shipping Cover from the Smart Cartridge
Smart Cartridges are shipped with a shipping cover in place. Remove these covers before attempting to load a
cartridge into an X3 ECD.
1 Hold the cartridge over a table or other close by surface so the cartridge will not fall to the floor if it is
dropped.
2 Hold the cartridge so the blast doors are facing away from you and others. (The blast doors are behind the
solid portion of the cartridge cover with the word REMOVE on it.)
3 Find the cartridge tab sticking out the rounded side of the shipping cover.
Chapter 3 Features & Operation