Taser X3 - Manual (Page 17)

17
!
Cartridge Color Indicator
(Blast Door) Color
Selected Cartridge
System Status Indicator –
Critical Fault
Cartridge Type
Energy Cell Indicator;
Fully Charged
Operating Mode (Manual)
The CID below shows the X3 ECD set to display metric information. The first cartridge is energized and has been
cycling for three seconds; the other two (both are 10 m/35 ft cartridges) have not been selected. The battery is
fully charged. There is a minor fault in the system.
!
10m 10m
3
Deployment Status
Indicator;
Connection Good
Cartridge Energized
System Status Indicator
– Minor Fault
Metric Cartridges
Seconds Elapsed in
Burst (3)
The CID below shows the X3 ECD loaded with two 25-foot cartridges and one 35-foot cartridge. One of the 25-
foot cartridges is selected, the battery is 80 percent full, and the ECD is in the manual mode.
Selected Cartridge
Energy Cell Indicator;
80% Remaining
Operating Mode (Manual)
25-Foot and 35-Foot Cartridges
The CID below shows that the X3 ECD is delivering a cycle to the target via probe deployment. The connection
is good, and the cycle has been in progress for two seconds. The ECD is in the training mode. (When the ECD
discharges, the semi-automatic/manual indicator is not displayed.) The ECD is loaded with training cartridges,
and the battery is at 60 percent.
10m 10m
2
Cartridge Energized
Training Mode
60% Remaining
25-Foot Training Cartridges
Seconds Elapsed in
Burst (2)
The CID below shows that the X3 ECD is in the training and manual modes, with a 25-foot training cartridge
selected, and a 35-foot training cartridge also is loaded. A live cartridge is loaded between the two training
cartridges; the center cartridge bay is locked. Sixty percent of the battery life remains.
Chapter 3 Features & Operation