Taser X3 User Manual
Page 36
36
OPTIONS MENU
AUTO_SHUTDOWN
ON
8
Press the selector switch to return to the MAIN MENU.
9
You can set the other options. If you are done configuring the X3 ECD, press the selector switch again to exit.
Configuring The X3 ECD and Viewing the System Status
Viewing the System Information
To view information about the X3 ECD system (for example, the serial number, date, time, and revision level),
follow these steps:
1
Point the X3 ECD in a safe direction.
2
Shift the CAM-Lock safety to the down (SAFE) position.
3
Remove the Smart Cartridges from the X3 ECD. See the "Unloading" section in this manual for more
information.
4
Press and hold the selector switch until the MAIN MENU displays.
5
Press the right ARC switch until the INFO option is highlighted.
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
6
Press the left ARC switch. The SYSTEM option should be highlighted by default.
INFO MENU
SYSTEM
WARRANTY
EPM
7
Press the left ARC switch. From top to bottom the CID displays the X3 ECD’s serial number, the date, the
time (Universal Time), and the system firmware revision number.
SYSTEM INFO
X12345678
16:42:10
V0001.000
08/24/2009
8
Press the selector switch to return to the INFO MENU.
9
You can view the other options. If you are done configuring the X3 ECD, press the selector switch again to
go to the MAIN MENU.
Chapter 3
Features & Operation