SurgeX SX-AX20 - Manual (Page 6)

SX-AX15 (20) Setup and Control Utility User Manual
Page 5
II. Installation
(continued)
Edit
This choice is only available when the user right-clicks on
an Axess in the Select List Box. Selecting this choice will
display the Edit Dialog Box. This dialog box allows the
user to edit the IP address, user name, and password of
the selected Axess. This is the only way the user can
delete a previously stored user name and password. The
Edit dialog box contains 3 fields, which are preloaded with
the current data of the selected Axess. It is important to
note that changes made here DO NOT affect the Axess
itself.
Delete
This choice is only available when the user right-clicks on an Axess in the Select List
Box.
This choice is used to delete an Axess from the Select List Box. To prevent accidentally
deleting a unit, the standard Windows confirmation dialog box is displayed before the
unit is deleted. This function is the same as the Delete Axess button below the List
Select Box.
Add Axess
This choice is only available when the user right-
clicks on white space (space below the last item
in the list box) in the list box. This menu choice
allows the user to manually add an Axess to the
Select List Box. Selecting this choice will display
the Add Axess Dialog Box. This function is the
same as the Add Axess button below the List
Select Box.
Discover
This choice is only available when the user right-clicks on white space in the list box.
This menu choice allows the user to discover all of the Axess units on the local network.
Clicking it will cause the SCU to send a discover packet out over the local network. This
command will NOT find Axess units which are not on the local network. Use the Add
Axess function for that purpose.