SurgeX SX-AX20 - Manual (Page 13)

SX-AX15 (20) Setup and Control Utility User Manual
Page 12
IV. Control Panel
(continued)
Voltage Display Bar
The Voltage display bar displays the measured line voltage. The background color will
be grey when the voltage is in the normal range, yellow when a low voltage alarm is
active, and red when a high voltage alarm is active.
Power Display Bar
The Power display bar displays the calculated total power currently being consumed by
all outlets.
Energy Display Bar
The Energy display bar displays the calculated total energy used by all outlets since the
displayed date and time.
Control Buttons
There are 5 control buttons located at the bottom of the control panel. The function of
each of these is described below. All commands sent to the Axess and all responses
from the Axess are encrypted using AES.
Query Button
This button sends a ‘query’ request to the selected Axess to refresh the displayed
information.
On Button
This button sends the ‘on’ command to the selected Axess. The Auto Refresh feature
will be started after the command is sent if required. See below.
Off Button
This button sends the ‘off’ command to the selected Axess.
Cycle Button
This button sends the ‘cycle’ command to the selected Axess. If the selected outlets are
currently on, a reboot will be performed. If the selected outlets are currently off, a power
cycle will be performed. The auto refresh feature will be started after the command is
sent.
Reset Button
This button resets the Energy Usage of the selected Axess.