V. tabs, Continued) – SurgeX SX-AX20 User Manual
Page 18
SX-AX15 (20) Setup and Control Utility User Manual
Page 17
V. Tabs
(continued)
IP Address
Use this tab to set the network settings of the
Axess.
IP Mode: Use this combo box to select the
IP addressing mode of the Axess. The
choices are Static, Arp Ping, and DHCP.
IP Address: Use this field to manually enter
the IP address of the Axess in dotted
decimal format. Only valid IP address will be
accepted.
Subnet Mask: Use this field to manually
enter the subnet mask for the Axess in
dotted decimal format.
Gateway: Use this field to manually enter
the gateway IP address in dotted decimal
format. Only valid IP addresses will be
accepted.
Web Server
Use this tab to configure the internal web server of
the Axess.
Enable: Use this check box to enable or
disable the internal web server of the Axess.
Port: Use this field to specify the port the
web server will listen on. Numeric entries
between 1 and 65532 are accepted.
SSL: Use this check box to enable or
disable SSL security. When enabled, the
Axess
must be accessed using