SurgeX SX-AX20 - Manual (Page 22)

SX-AX15 (20) Setup and Control Utility User Manual
Page 21
V. Tabs
(continued)
Timed Events
Use this tab to add, delete, and edit timed events.
Select Event: Use the select event combo box to
add, delete, or select an event to be edited. To add
an event, select “Add Event” from the combo box.
This will create a new timed event with the name
“NewEventn”, where n is the event’s internal ID
number. To delete an event, select the event to be
deleted using the select event combo box, then
select Delete Event. A confirmation dialog will be
displayed to prevent the accidental deletion of an
event. To edit an event, select the event to be edited
using the combo box.
Start Date: Use the Start Date combo box (date
picker) to select the date that the event will be
triggered.
Time: Use the time picker to set the time of day that the event is to be executed.
Action: Use the Action combo box to select the action to be taken on the specified date
and time. The selections are Off, On, and Cycle.
Apply To: Use the Apply To combo box to select the outlet or group that the event will
affect.
Repeats Every: Use the Repeats Every combo box to select if and when the event
repeats. The selections are Never, Daily, Weekly, Monthly, and Annually.
AutoPing
Up to 16 AutoPing Trigger/Action pairs can be set and
assigned to any outlet or group. One outlet can be
controlled by multiple AutoPing events. Use this tab to add,
delete, and edit AutoPing triggers and actions.
Select AutoPing: Use the Select AutoPing combo
box to select one of 16 AutoPing events to manage.
IP Address: This field is used to set the IP address
of the AutoPing to monitor, in dotted decimal format.
Action: The Action combo box is used to select the
action performed when Autoping is triggered.
Frequency: This field is used to set the time
interval, in seconds, between pings of the specified
IP address. Numeric values between 0 and 999 are
accepted.
Fail Count: This field is used to set the number of
successive times that the ping must fail before the
action is triggered. Numeric values between 1 and 99 are accepted.
Apply To: This combo box is used to select the outlet or group that the AutoPing will
affect.