StorCase Technology InfoStation 5-Bay SATA 3Gbps RAID - Manual (Page 49)

InfoStation 5-Bay RAID User's Guide - Rev. C00 StorCase Technology, Inc.
RAID Configuration 39
ADMINISTRATION
Changing the Password
The password information is stored locally on the server running the daemon. Default
password= admin.
1. Select Change Password from the File menu.
2. Enter the current password (default = admin).
3. Enter the new password (5 characters minimum) in both fields.
4. Click OK to implement new password.
Managing the Client Connection to the Daemon
The InfoStation RAID Manager consists of two (2) modules:
• Daemon
• User Interface
The Daemon monitors the status of the InfoStation and performs SAFE volume rebuilds. By
default, the User Interface attaches to a Daemon running on the same host to display the
information gathered by the Daemon. The user can configure the User Interface to display
information tracked by a Daemon running on a remote host. Having the User Interface remote
to the Daemon allows remote monitoring for system fan and drive failures. Identification of
a failed part will allow the service provider to replace failed components before further
complications arise.
Prerequisites
The user should have the following before a remote connection can be established:
• The Daemon is installed and running on a host computer connected to the InfoStation.
• The User Interface is installed and running on a remote host computer.
A TCP/IP connection can be established between the Daemon and User Interface. The Daemon
listens for connections on TCP port 51115. Do not change the port number.