StorCase Technology InfoStation 5-Bay SATA 3Gbps RAID - Manual (Page 41)

InfoStation 5-Bay RAID User's Guide - Rev. C00 StorCase Technology, Inc.
RAID Configuration 31
Configuring Volumes
NOTE: Use the Disk Management utility (provided by the OS) to delete all partitions,
except the unallocated, uninitialized drive that represents the InfoStation RAID
processor. Refer to section "Partitioning Configured Volumes" for further in-
formation.
The Basic Configuration Wizard (Figure 10) is accessed from the Status Window and allows
the user to manage volume.
Volumes are based on a user-selected storage policy. User cannot modify volume counts or
capacities. To protect against unauthorized changes, the RAID Manager will prompt for a
password (Figure 11) when accessing the Wizard for the first time.
1. Select Configure Box from the Edit menu or click the Configure Box toolbar but-
ton to open the Basic Configuration Wizard.
2. When prompted (Figure 11), enter the administrator password (default = admin).
Figure 11: Password Prompt
3. Select the desired Storage Policy in the Storage Policy frame.
4. When prompted, click OK to confirm.
5. Select Save to Config File from the File menu or click the Write Configuration
toolbar button to save the configuration.
6. Click Apply to create selected configuration. The Volume display will then close
automatically and the Status window will soon refresh.
7. Partition the configured volume(s) to complete the implementation. Refer to section
"Partitioning Configured Volumes" for further information.