beautypg.com

7 usage how-to’s, 1 how to use call transfer, 2 how to make conference calls – D-Link VOIP DVX-7090 User Manual

Page 77: Usage how-to’s, Ow to use call transfer, Ow to make conference calls, Sage

background image

Usage how-to’s

7

U

SAGE

H

OW

-

TO

S

7.1

H

OW TO USE CALL TRANSFER

The DVX-7090 Router provides for 2 types of transfer:

• Attended (consultative) transfer when the transferor first contacts the transfer target

before leaving the call, and

• Blind (unsupervised) transfer when the transferor just transfers the call to the called

extension and hangs up.

To use the transfer service the user should belong to a group authorized to use the Transfer
service (See the

Configuring groups

section for details).

A common transfer scenario unfolds as follows:

1. User A calls user B

2. User B answers the call

3. User B wishes to transfer the call to user C (the sequence of events when user A

does the transfer to user C is the same).

4. User B presses the Flash button to place user A on hold. (Note: If there is no Flash

button hitting the Flash key can be emulated by sequentially pressing * and # within
one second time.)

5. User B dials user C (Note: The majority of phones require pressing # to complete

dialing).

Further steps vary with the type of transfer (attended or blind.)

In case of a blind transfer:

6. User B hangs up.

7. User A becomes the calling party for user C and hears the ringback tone.

8. When/if user C answers the call, a call session between A and C is established.

During an attended transfer:

6. User B establishes a connection with user C

7. User B is able to switch between user A and C by pressing the Flash button if any (if

there is no Flash button hitting the Flash key can be emulated by sequentially
pressing * and # within one second time.) User A and C do not hear each other.

Note:

If user B’s group has Conference permissions users A and C will be able to hear

each other.

8. When user B hangs up, a call session between A and C becomes established.

7.2

H

OW TO MAKE CONFERENCE CALLS

The DVX-7090 Router supports 3 party conference calls only.

As setting up a conference involves the call transfer service, the user who is the conference
initiator must belong to a group with both Transfer and Conference permissions.

The 3-party conference scenario unfolds as follows:

DVX-7090 VoIP Router

page 77 of 83