Spectrum Controls 1746sc-INO4vi - Manual (Page 8)

iv SLC 500 ™ Isolated Analog Output Modules
Table 1. Related Allen-Bradley documents
Allen-Bradley Doc. No. Title
1747-2.30 SLC 500 System Overview
SGI-1.1 Application Considerations for Solid State Controls
1770-4.1 Allen-Bradley Programmable Controller Grounding and
Wiring Guidelines
1747-6.2 Installation & Operation Manual for Modular Hardware
Style Programmable Controllers
1747-NI001 Installation & Operation Manual for Fixed Hardware Style
Programmable Controllers
1747-6.4 Allen-Bradley Advanced Programming Software (APS)
User Manual
1747-6.11 Allen-Bradley Advanced Programming Software (APS)
Reference Manual
1747-6.3 Getting Started Guide for Advanced Programming
Software (APS)
ABT-1747-TSG001 SLC 500 Software Programmers’s Quick Reference
Guide
1747-NP002 Allen-Bradley HHT (Hand-Held Terminal) User Manual
1747-NM009 Getting Started Guide for HHT (Hand-Held Terminal)
SD499 Allen-Bradley Publication Index
AG-7.1 Allen-Bradley Industrial Automation Glossary
To obtain a copy of any of the Allen-Bradley documents listed, contact
your local Allen-Bradley office or distributor.
Terms & Abbreviations
You Should Know
You should understand the following terms and abbreviations before
using this guide. For the definitions of terms not listed here, refer to
Allen-Bradley’s Industrial Automation Glossary, Publication AG-7.1
Attenuation – The reduction in magnitude of a signal as it passes
through a system. The opposite of gain.
Channel – Refers to one of the sets of signal interfaces available on a
module’s terminal block.
Channel update time – For analog outputs, the time required for the
channel to convert the data received from the processor to analog output
signals at the terminals.
Chassis – See rack.