Directed Electronics G312R - Manual (Page 16)

13 © 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
identified.
step 5
Parking light flash
There are several different types of parking light circuits. The
following description is for a standard positive-triggered parking
light circuit, usually located at the light switch. If the web vehicle
information suggests a different type of parking light circuit,
please contact Rattler Technical Support.
Using the web information on the vehicle, locate the suspected
wire and place the BLACK lead of the meter to a ground and
secure it. Place the multi-meter in the DC position. Using the
RED lead of the meter, probe the wire. With the light switch in
the off position the meter will read 0.00 volts. While watching
the meter, turn the switch to the parking light position. The
meter will read between 10.00 volts and 13.00 volts.
➜