Rocktron Replifex User Manual

Page 67

Using the Replifex

with a Rocktron All Access

in REMOTE mode

A Rocktron All Access

MIDI footswitch can be configured as a dedicated remote control for the

Replifex

- allowing direct access to specific Replifex

features and parameters from the footswitch at any

time.

To use an All Access

™

footswitch as a dedicated remote, connect the MIDI OUT of the All

Access

™

to the REMOTE jack of the Replifex

™

using a 7-pin MIDI cable, as shown below.

Step 1

Step 2

Reinitialize the controller assignments as shown on page 62 under the heading "Restoring the
Replifex

™

Controller Assignments". This will match up the Replifex's controller assignments

to the All Access

™

. A code of "244" must be entered to initialize only the controller

information.

ALL RESTORE

244

To set up the Replifex

™

for remote operation, do the following:

Operating the Replifex

™