Factory restore, Restoring a single factory preset – Rocktron Replifex User Manual

Page 62

Factory Restore

The Factory Restore function allows you to restore altered Replifex

presets to their original condition

as shipped from the factory. Either the entire Replifex

memory can be restored, a single preset can be

restored to any preset location, or the controller information alone can be restored.

Step 1

Turn the FUNCTION SELECT control clockwise to "FACTORY RESTORE".

FACTORY RESTORE

Step 2

Turn the PARAMETER SELECT control one step clockwise to "RESTR 1 TO 1". The
number on the left is the original factory preset number to be restored. The number on the
right is the preset location that the preset will be stored into.

RESTR

1 TO 1

Factory preset to be restored

Preset location to store into

Step 3

Turn the PRESET control to select the factory preset to be restored.

RESTR

98 TO 1

Step 4

Turn the PARAMETER ADJUST control to select the preset location to store the restored
preset into.

RESTR

98 TO 22

Restoring a single factory preset:

Operating the Replifex

™