Record, Midi dump/load bulk dump/load – Rocktron Replifex User Manual

Page 58

To dump a single Replifex

™

preset into a sequencer:

Operating the Replifex

™

Note:

When performing data dumps to and from the Replifex

™

, always perform the dump in real time sequence mode. This

will ensure that data loaded back into the Replifex

™

is not sent faster than the Replifex

™

can receive it.

Also, make sure that the sequencer's MIDI filter is set to accept SYSX information.

Connect a standard MIDI cable from the MIDI OUT of the transmitting Replifex

™

to the

MIDI IN on the receiving sequencer.

Step 1

Step 2

Turn the FUNCTION SELECT controls on the transmitting Replifex

™

until "MIDI DUMP/

LOAD" is displayed.

Step 3

Turn the PARAMETER SELECT control on the transmitting Replifex

™

until "BULK DUMP/

LOAD" is displayed.

MIDI DUMP/LOAD

BULK DUMP/LOAD

TRANSMITTING REPLIFEX

Step 4

Start the sequencer recording.

RECORD