Rocktron Replifex - Manual (Page 17)

14
Replifex ™ Functions and Parameter Descriptions
Each Replifex ™ preset is divided into individual blocks called functions (such
as "Mixer", "Reverb", etc.). Within each function is a set of controls which allow you
to manipulate various aspects of that function. These controls are called param-
eters. The setting of each of the parameters determines the overall sound of each
Replifex ™ preset.
The Replifex ™ user interface is set up to allow you to first access each function
(via the FUNCTION SELECT control), then the list of available parameters for the
selected function (via the PARAMETER SELECT control) and, finally, the adjustable
value for each parameter (via the PARAMETER ADJUST control).
Step 2:
Turn to select a parameter
within the selected function.
Step 1:
Turn to select a function.
Step 3:
Turn to alter the value of the
selected parameter.
The remainder of this section will discuss each of the effect-based functions
and the associated adjustable parameters that they provide. Functions not dis-
cussed in this section are utility-based, and are described in Section 7, "Operating
the Replifex ™ ".
Functions and Parameter Descriptions