Driverack, Appendix, A.3 specifications – dbx DriveRack PX Manual User Manual
Page 39
A.3 Specifications
ANALOG INPUTS:
Number of Inputs:
2 (Stereo) Line inputs
1 RTA Mic input
Connectors:
2 Female XLR line inputs
1 XLR RTA Mic input
Type:
Electronically balanced, RF filtered
Impedance:
>40kΩ
Max Input Line level:
+20dBu
Input CMRR:
>45dB
RTA Mic Phantom Voltage:
+15VDC
RTA Mic EIN:
<-110dBu, 22Hz-22kHz, 150Ω
ANALOG OUTPUTS:
Number of Outputs:
2 (Stereo) Line outputs
2 Sub outputs (mono or stereo)
Connectors:
2 Male XLR XLR line outputs
2 Male XLR Sub outputs
Type:
Electronically balanced, RF filtered
Impedance:
120 Ω
Max Output Level:
+20dBu
A/D PERFORMANCE:
Type:
dbx Type IV™ conversion system
Dynamic Range:
110dB A-weighted
107dB unweighted
Type IV dynamic range:
123dB with transient material,
A-weighted, 22kHz BW
121dB with transient material,
unweighted, 22kHz BW
115dB typical with program material,
A-weighted, 22kHz BW
Sample Rate:
48kHz
D/A PERFORMANCE:
Dynamic Range:
112dB A-weighted
110dB unweighted
SYSTEM PERFORMANCE:
Dynamic Range:
110dB A-unweighted,
>107dB unweighted, 0.002% typical at +4dBu,
1kHz, 0dB input gain
THD+N:
Frequency Response:
20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk:
<-110dB, 120dB typical
Crosstalk input to output:
<-100dB
DriveRack
®
PX
Section A
Appendix
®