dbx DriveRack PX Manual - Manual (Page 12)

2.4 DriveRack PX Wizard
Now that you have made all of your audio connections and have made yourself familiar with
the front-panel navigation of the unit, you can easily optimize your system through the use
of the DriveRack® PX Wizards. These allow for quick and accurate venue setups. There are
three wizards: Setup, EQ, and AFS. Press hold any button in the Wizard section of the front
panel to access them. The wizards are designed to be used in sequence (from top to bottom),
but can be used individually as well.
Before you use the wizards, make sure the controls on your powered speakers are set the same
on both speakers. For example, if you’re using subs, and they have a polarity setting, make
sure they’re both set to the same polarity. Also, if your powered speakers have a Mic/Line
setting, make sure they’re both set to Line, and if they have their own EQ settings, disable
the EQ settings on the powered speakers.
The following section walks you through each of the wizards.
SETuP WIzARD
From preset mode, press and hold the button and the display will appear as
follows:
System Setup WIZARD
Press the button to continue.
The display will appear as follows:
Simply rotate the wheel to select either a Mono or Stereo input configuration.
Once you have selected your input option, press the button and the display
will appear as follows:
EON10G2
JBL EON
Main Speakers
•
•
•
DriveRack
®
PX
Section 2
Getting Started
®